ZEPRO Z 100

Our stable and lightweight tail lift for use on light/medium duty trucks in the 5 to 12 ton GVW class. Lifting capacity of 1000 kg.

Due to the importance of keeping as much of the total vechicle weight for the payload, we offer only aluminium platforms for the Z100 models.
In addition the underrun bar has a light weight aluminium design for further weight saving.

×

Rollstops

If you have loads on wheels, the built-in rollerstops provides effective protection for both goods and employees.

Previous Next
×

Additional control unit

Additional control units are available in several versions for fixed installation, spiral cable or radio control.

Previous Next
×

Radio control unit

Compact and simple to install.

Previous Next
×

Side loading ramps

Possibility to load from the platform side even from docks and pavements. Available in aluminium in several sizes.

Previous Next
×

Drive over locks

In normal use a platform should never be overloaded and the operator should always refer to the ZEPRO loading diagram for his lift. If it is necessary to use the platform as a forklift bridge to the loading dock, special drive over locks must be installed. These locks can take up to 3 tons total loading (forklift plus goods) and are attached to the truck and pulled out when required. The locks take the load off the tail lift cylinders and give you even greater flxibilty when using your ZEPRO lift.

Previous Next
×

Warning lights

To increase the safety of loading and unloading warning lights can be mounted on the lift. Activated automatically when the platform is lowered to a horizontal position.

Previous Next

ZEPRO Z 100 specifications

Technical infoZEPRO Z 100-110 ZEPRO Z 100-130
Lift Height (mm)1100 mm1300 mm
Platform Length (mm)1200 - 2000 mm1200 - 2000 mm
Platform Width (mm)2160 - 2580 mm2160 - 2580 mm
Lifting Capacity (kg)1000 kg1000 kg
Alu platform
Steel platform
Alu/alu platform
Steel/alu platform
Contact us

Din sökning på "" gav träffar.

Searching

×
×