ZEPRO Z 10/15/20

Our standard medium to heavy duty cantilever lift, with a lifting capacity of 1000, 1500 and 2000 kg. Designed for vehicles with GVW over 12 tons.

The load centre of 750 mm enables heavy, voluminous loads to be handled with ease.
The maximum lifting height is 1500 mm.

- Steel and aluminium platforms in a wide variety of dimensions.
- The built-in hydraulic unit keeps the operation noise to a minimum and provides protection for the most sensitive of the components.
- Adjustable bumper bar provides flexibility of positioning during installation.

×

Rollstops

If you have loads on wheels, the built-in rollerstops provides effective protection for both goods and employees.

Previous Next
×

Additional control unit

Additional control units are available in several versions for fixed installation, spiral cable or radio control.

Previous Next
×

Radio control unit

Compact and simple to install.

Previous Next
×

Side loading ramps

Possibility to load from the platform side even from docks and pavements. Available in aluminium in several sizes.

Previous Next
×

Drive over locks

In normal use a platform should never be overloaded and the operator should always refer to the ZEPRO loading diagram for his lift. If it is necessary to use the platform as a forklift bridge to the loading dock, special drive over locks must be installed. These locks can take up to 3 tons total loading (forklift plus goods) and are attached to the truck and pulled out when required. The locks take the load off the tail lift cylinders and give you even greater flxibilty when using your ZEPRO lift.

Previous Next
×

Warning lights

To increase the safety of loading and unloading warning lights can be mounted on the lift. Activated automatically when the platform is lowered to a horizontal position.

Previous Next

ZEPRO Z 10/15/20 specifications

Technical infoZEPRO Z 10-130 ZEPRO Z 10-150 ZEPRO Z 15-130 ZEPRO Z 15-150 ZEPRO Z 20-130 ZEPRO Z 20-150
Lift Height (mm)1300 mm1500 mm1300 mm1500 mm1300 mm1500 mm
Platform Length (mm)1450 - 2200 mm1450 - 2200 mm1450 - 2200 mm1450 - 2200 mm1450 - 2200 mm1450 - 2200 mm
Platform Width (mm)2450 - 2580 mm2450 - 2580 mm2450 - 2580 mm2450 - 2580 mm2450 - 2580 mm2450 - 2580 mm
Lifting Capacity (kg)1000 kg1000 kg1500 kg1500 kg2000 kg2000 kg
Alu platform
Steel platform
Alu/alu platform
Steel/alu platform
×

ZEPRO Z20 Tail lift.mp4

Contact us

Din sökning på "" gav träffar.

Searching

×
×